PCD face miller

The new JEL PCD face miller is noteworthy for its outstanding cost efficiency. High feeds, milling feeds and longest tool lives can be achieved thanks to the high number of teeth and solid design.

Mainly suited to roughing and finishing cast or solid aluminium.



  • Automotive
  • Aerospace
  • Aluminium foundries
  • Pneumatics and hydraulics


Machining example:

Part: housing

Chiron Mill 2000

Face milling of the sealing surface and mounting domes, upper side and underside

Material: GAlSi9

Cutting depth: 4 mm

PCD face miller x40,
NZ10 HSK-A63

Cutting data:
vc =1.507m/min
 = 12.000 rpm (Smax.)
fz = 0,05mm/tooth 
 = 6.000 mm/min

Surface finish: Rz 1,51-2,50


Your PLUS:

  • Cutting depths of up to 8 mm
    thanks to firmly soldered cutting edges in a solid basic body
  • Short cycle times
    thanks to maximum number of cutting edges and highest cutting speeds
  • No adjustment necessary
    thanks to Monoblock design
  • Attainable surface quality
    Rz < 10 µm (type 150)
    thanks to fine balancing and extremely tight manufacturing tolerances
  • Available in two variants
    type 140: for Rz > 10 µm - with eroded cutting edge design
    type 150: for Rz < 10 µm - with special cutting edge design
  • Central internal cooling supply
    Fed to the cutting edge via a coolant screw
  • Available at short notice
    PCD face miller available ex stock